; RUN: opt -loop-vectorize -force-vector-width=2 -debug-only=loop-vectorize -disable-output < %s 2>&1 | FileCheck %s --check-prefix=VF_2
; RUN: opt -loop-vectorize -force-vector-width=4 -debug-only=loop-vectorize -disable-output < %s 2>&1 | FileCheck %s --check-prefix=VF_4
; RUN: opt -loop-vectorize -force-vector-width=8 -debug-only=loop-vectorize -disable-output < %s 2>&1 | FileCheck %s --check-prefix=VF_8
; RUN: opt -loop-vectorize -force-vector-width=16 -debug-only=loop-vectorize -disable-output < %s 2>&1 | FileCheck %s --check-prefix=VF_16
; REQUIRES: asserts
target datalayout = "e-m:e-i64:64-i128:128-n32:64-S128"
target triple = "aarch64--linux-gnueabi"
%i8.2 = type {i8, i8}
define void @i8_factor_2(%i8.2* %data, i64 %n) {
entry:
br label %for.body
; VF_8-LABEL: Checking a loop in 'i8_factor_2'
; VF_8: Found an estimated cost of 2 for VF 8 For instruction: %tmp2 = load i8, i8* %tmp0, align 1
; VF_8-NEXT: Found an estimated cost of 0 for VF 8 For instruction: %tmp3 = load i8, i8* %tmp1, align 1
; VF_8-NEXT: Found an estimated cost of 0 for VF 8 For instruction: store i8 0, i8* %tmp0, align 1
; VF_8-NEXT: Found an estimated cost of 2 for VF 8 For instruction: store i8 0, i8* %tmp1, align 1
; VF_16-LABEL: Checking a loop in 'i8_factor_2'
; VF_16: Found an estimated cost of 2 for VF 16 For instruction: %tmp2 = load i8, i8* %tmp0, align 1
; VF_16-NEXT: Found an estimated cost of 0 for VF 16 For instruction: %tmp3 = load i8, i8* %tmp1, align 1
; VF_16-NEXT: Found an estimated cost of 0 for VF 16 For instruction: store i8 0, i8* %tmp0, align 1
; VF_16-NEXT: Found an estimated cost of 2 for VF 16 For instruction: store i8 0, i8* %tmp1, align 1
for.body:
%i = phi i64 [ 0, %entry ], [ %i.next, %for.body ]
%tmp0 = getelementptr inbounds %i8.2, %i8.2* %data, i64 %i, i32 0
%tmp1 = getelementptr inbounds %i8.2, %i8.2* %data, i64 %i, i32 1
%tmp2 = load i8, i8* %tmp0, align 1
%tmp3 = load i8, i8* %tmp1, align 1
store i8 0, i8* %tmp0, align 1
store i8 0, i8* %tmp1, align 1
%i.next = add nuw nsw i64 %i, 1
%cond = icmp slt i64 %i.next, %n
br i1 %cond, label %for.body, label %for.end
for.end:
ret void
}
%i16.2 = type {i16, i16}
define void @i16_factor_2(%i16.2* %data, i64 %n) {
entry:
br label %for.body
; VF_4-LABEL: Checking a loop in 'i16_factor_2'
; VF_4: Found an estimated cost of 2 for VF 4 For instruction: %tmp2 = load i16, i16* %tmp0, align 2
; VF_4-NEXT: Found an estimated cost of 0 for VF 4 For instruction: %tmp3 = load i16, i16* %tmp1, align 2
; VF_4-NEXT: Found an estimated cost of 0 for VF 4 For instruction: store i16 0, i16* %tmp0, align 2
; VF_4-NEXT: Found an estimated cost of 2 for VF 4 For instruction: store i16 0, i16* %tmp1, align 2
; VF_8-LABEL: Checking a loop in 'i16_factor_2'
; VF_8: Found an estimated cost of 2 for VF 8 For instruction: %tmp2 = load i16, i16* %tmp0, align 2
; VF_8-NEXT: Found an estimated cost of 0 for VF 8 For instruction: %tmp3 = load i16, i16* %tmp1, align 2
; VF_8-NEXT: Found an estimated cost of 0 for VF 8 For instruction: store i16 0, i16* %tmp0, align 2
; VF_8-NEXT: Found an estimated cost of 2 for VF 8 For instruction: store i16 0, i16* %tmp1, align 2
; VF_16-LABEL: Checking a loop in 'i16_factor_2'
; VF_16: Found an estimated cost of 4 for VF 16 For instruction: %tmp2 = load i16, i16* %tmp0, align 2
; VF_16-NEXT: Found an estimated cost of 0 for VF 16 For instruction: %tmp3 = load i16, i16* %tmp1, align 2
; VF_16-NEXT: Found an estimated cost of 0 for VF 16 For instruction: store i16 0, i16* %tmp0, align 2
; VF_16-NEXT: Found an estimated cost of 4 for VF 16 For instruction: store i16 0, i16* %tmp1, align 2
for.body:
%i = phi i64 [ 0, %entry ], [ %i.next, %for.body ]
%tmp0 = getelementptr inbounds %i16.2, %i16.2* %data, i64 %i, i32 0
%tmp1 = getelementptr inbounds %i16.2, %i16.2* %data, i64 %i, i32 1
%tmp2 = load i16, i16* %tmp0, align 2
%tmp3 = load i16, i16* %tmp1, align 2
store i16 0, i16* %tmp0, align 2
store i16 0, i16* %tmp1, align 2
%i.next = add nuw nsw i64 %i, 1
%cond = icmp slt i64 %i.next, %n
br i1 %cond, label %for.body, label %for.end
for.end:
ret void
}
%i32.2 = type {i32, i32}
define void @i32_factor_2(%i32.2* %data, i64 %n) {
entry:
br label %for.body
; VF_2-LABEL: Checking a loop in 'i32_factor_2'
; VF_2: Found an estimated cost of 2 for VF 2 For instruction: %tmp2 = load i32, i32* %tmp0, align 4
; VF_2-NEXT: Found an estimated cost of 0 for VF 2 For instruction: %tmp3 = load i32, i32* %tmp1, align 4
; VF_2-NEXT: Found an estimated cost of 0 for VF 2 For instruction: store i32 0, i32* %tmp0, align 4
; VF_2-NEXT: Found an estimated cost of 2 for VF 2 For instruction: store i32 0, i32* %tmp1, align 4
; VF_4-LABEL: Checking a loop in 'i32_factor_2'
; VF_4: Found an estimated cost of 2 for VF 4 For instruction: %tmp2 = load i32, i32* %tmp0, align 4
; VF_4-NEXT: Found an estimated cost of 0 for VF 4 For instruction: %tmp3 = load i32, i32* %tmp1, align 4
; VF_4-NEXT: Found an estimated cost of 0 for VF 4 For instruction: store i32 0, i32* %tmp0, align 4
; VF_4-NEXT: Found an estimated cost of 2 for VF 4 For instruction: store i32 0, i32* %tmp1, align 4
; VF_8-LABEL: Checking a loop in 'i32_factor_2'
; VF_8: Found an estimated cost of 4 for VF 8 For instruction: %tmp2 = load i32, i32* %tmp0, align 4
; VF_8-NEXT: Found an estimated cost of 0 for VF 8 For instruction: %tmp3 = load i32, i32* %tmp1, align 4
; VF_8-NEXT: Found an estimated cost of 0 for VF 8 For instruction: store i32 0, i32* %tmp0, align 4
; VF_8-NEXT: Found an estimated cost of 4 for VF 8 For instruction: store i32 0, i32* %tmp1, align 4
; VF_16-LABEL: Checking a loop in 'i32_factor_2'
; VF_16: Found an estimated cost of 8 for VF 16 For instruction: %tmp2 = load i32, i32* %tmp0, align 4
; VF_16-NEXT: Found an estimated cost of 0 for VF 16 For instruction: %tmp3 = load i32, i32* %tmp1, align 4
; VF_16-NEXT: Found an estimated cost of 0 for VF 16 For instruction: store i32 0, i32* %tmp0, align 4
; VF_16-NEXT: Found an estimated cost of 8 for VF 16 For instruction: store i32 0, i32* %tmp1, align 4
for.body:
%i = phi i64 [ 0, %entry ], [ %i.next, %for.body ]
%tmp0 = getelementptr inbounds %i32.2, %i32.2* %data, i64 %i, i32 0
%tmp1 = getelementptr inbounds %i32.2, %i32.2* %data, i64 %i, i32 1
%tmp2 = load i32, i32* %tmp0, align 4
%tmp3 = load i32, i32* %tmp1, align 4
store i32 0, i32* %tmp0, align 4
store i32 0, i32* %tmp1, align 4
%i.next = add nuw nsw i64 %i, 1
%cond = icmp slt i64 %i.next, %n
br i1 %cond, label %for.body, label %for.end
for.end:
ret void
}
%i64.2 = type {i64, i64}
define void @i64_factor_2(%i64.2* %data, i64 %n) {
entry:
br label %for.body
; VF_2-LABEL: Checking a loop in 'i64_factor_2'
; VF_2: Found an estimated cost of 2 for VF 2 For instruction: %tmp2 = load i64, i64* %tmp0, align 8
; VF_2-NEXT: Found an estimated cost of 0 for VF 2 For instruction: %tmp3 = load i64, i64* %tmp1, align 8
; VF_2-NEXT: Found an estimated cost of 0 for VF 2 For instruction: store i64 0, i64* %tmp0, align 8
; VF_2-NEXT: Found an estimated cost of 2 for VF 2 For instruction: store i64 0, i64* %tmp1, align 8
; VF_4-LABEL: Checking a loop in 'i64_factor_2'
; VF_4: Found an estimated cost of 4 for VF 4 For instruction: %tmp2 = load i64, i64* %tmp0, align 8
; VF_4-NEXT: Found an estimated cost of 0 for VF 4 For instruction: %tmp3 = load i64, i64* %tmp1, align 8
; VF_4-NEXT: Found an estimated cost of 0 for VF 4 For instruction: store i64 0, i64* %tmp0, align 8
; VF_4-NEXT: Found an estimated cost of 4 for VF 4 For instruction: store i64 0, i64* %tmp1, align 8
; VF_8-LABEL: Checking a loop in 'i64_factor_2'
; VF_8: Found an estimated cost of 8 for VF 8 For instruction: %tmp2 = load i64, i64* %tmp0, align 8
; VF_8-NEXT: Found an estimated cost of 0 for VF 8 For instruction: %tmp3 = load i64, i64* %tmp1, align 8
; VF_8-NEXT: Found an estimated cost of 0 for VF 8 For instruction: store i64 0, i64* %tmp0, align 8
; VF_8-NEXT: Found an estimated cost of 8 for VF 8 For instruction: store i64 0, i64* %tmp1, align 8
; VF_16-LABEL: Checking a loop in 'i64_factor_2'
; VF_16: Found an estimated cost of 16 for VF 16 For instruction: %tmp2 = load i64, i64* %tmp0, align 8
; VF_16-NEXT: Found an estimated cost of 0 for VF 16 For instruction: %tmp3 = load i64, i64* %tmp1, align 8
; VF_16-NEXT: Found an estimated cost of 0 for VF 16 For instruction: store i64 0, i64* %tmp0, align 8
; VF_16-NEXT: Found an estimated cost of 16 for VF 16 For instruction: store i64 0, i64* %tmp1, align 8
for.body:
%i = phi i64 [ 0, %entry ], [ %i.next, %for.body ]
%tmp0 = getelementptr inbounds %i64.2, %i64.2* %data, i64 %i, i32 0
%tmp1 = getelementptr inbounds %i64.2, %i64.2* %data, i64 %i, i32 1
%tmp2 = load i64, i64* %tmp0, align 8
%tmp3 = load i64, i64* %tmp1, align 8
store i64 0, i64* %tmp0, align 8
store i64 0, i64* %tmp1, align 8
%i.next = add nuw nsw i64 %i, 1
%cond = icmp slt i64 %i.next, %n
br i1 %cond, label %for.body, label %for.end
for.end:
ret void
}
%i64.8 = type {i64, i64, i64, i64, i64, i64, i64, i64}
define void @i64_factor_8(%i64.8* %data, i64 %n) {
entry:
br label %for.body
; The interleave factor in this test is 8, which is greater than the maximum
; allowed factor for AArch64 (4). Thus, we will fall back to the basic TTI
; implementation for determining the cost of the interleaved load group. The
; stores do not form a legal interleaved group because the group would contain
; gaps.
;
; VF_2-LABEL: Checking a loop in 'i64_factor_8'
; VF_2: Found an estimated cost of 10 for VF 2 For instruction: %tmp2 = load i64, i64* %tmp0, align 8
; VF_2-NEXT: Found an estimated cost of 0 for VF 2 For instruction: %tmp3 = load i64, i64* %tmp1, align 8
; VF_2-NEXT: Found an estimated cost of 7 for VF 2 For instruction: store i64 0, i64* %tmp0, align 8
; VF_2-NEXT: Found an estimated cost of 7 for VF 2 For instruction: store i64 0, i64* %tmp1, align 8
for.body:
%i = phi i64 [ 0, %entry ], [ %i.next, %for.body ]
%tmp0 = getelementptr inbounds %i64.8, %i64.8* %data, i64 %i, i32 2
%tmp1 = getelementptr inbounds %i64.8, %i64.8* %data, i64 %i, i32 6
%tmp2 = load i64, i64* %tmp0, align 8
%tmp3 = load i64, i64* %tmp1, align 8
store i64 0, i64* %tmp0, align 8
store i64 0, i64* %tmp1, align 8
%i.next = add nuw nsw i64 %i, 1
%cond = icmp slt i64 %i.next, %n
br i1 %cond, label %for.body, label %for.end
for.end:
ret void
}