Adi's DZ65RGB Layout

This layout modifies the extra row on the right and makes some of the key bindings easier to reach on Layer 1.

Step by Step

1. Build your Firmware: run build command in directory make dztech/dz65rgb/v1:adi
2. Flash your Firmware:
   • Open QMK Toolbox Application
   • Open firmware file: dztech_dz65rgb_v1_adi.bin
   • Unplug keyboard USB-C, and hold the ESC key while plugging it back in
   • Check that QMK Toolbox displays: *** STM32 device connected.
   • Hit the flash button!