/*
Copyright 2021 Salicylic_Acid

This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.

This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU General Public License for more details.

You should have received a copy of the GNU General Public License
along with this program.  If not, see <http://www.gnu.org/licenses/>.
*/

#include QMK_KEYBOARD_H
#include "keymap_jp.h"



// Each layer gets a name for readability, which is then used in the keymap matrix below.
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
// Layer names don't all need to be of the same length, obviously, and you can also skip them
// entirely and just use numbers.
enum layer_number {
  _QWERTY = 0,
  _LOWER,
  _RAISE,
  _ADJUST,
};

enum custom_keycodes {
  RGB_RST = SAFE_RANGE
};

const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  [_QWERTY] = LAYOUT(
  //,-----------------------------------------------------|   |--------------------------------------------------------------------------------.
       KC_ESC,    KC_1,    KC_2,    KC_3,    KC_4,    KC_5,        KC_6,    KC_7,    KC_8,    KC_9,    KC_0, JP_MINS, JP_CIRC,  JP_YEN, KC_BSPC, KC_DEL,
  //|--------+--------+--------+--------+--------+--------|   |--------+--------+--------+--------+--------+--------+--------+--------+--------|
       KC_TAB,    KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,        KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,   JP_AT, JP_LBRC,  KC_ENT, KC_PGUP,
  //|--------+--------+--------+--------+--------+--------|   |--------+--------+--------+--------+--------+--------+--------+--------+--------|
     KC_LCTRL,    KC_A,    KC_S,    KC_D,    KC_F,    KC_G,        KC_H,    KC_J,    KC_K,    KC_L, JP_MINS, JP_BSLS, JP_RBRC,          KC_PGDN,
  //|--------+--------+--------+--------+--------+--------|   |--------+--------+--------+--------+--------+--------+--------+--------+--------|
      KC_LSFT,    KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,        KC_N,    KC_M, KC_COMM,  KC_DOT, JP_SLSH, JP_BSLS, KC_RSFT,   KC_UP,
  //|--------+--------+--------+--------+--------+--------|   |--------+--------+--------+--------+--------+--------+--------+--------+--------|
      KC_ZKHK, KC_LGUI, KC_LALT, KC_MHEN,LT(_LOWER,KC_ENT),KC_BSPC,KC_DEL,LT(_RAISE,KC_SPC), KC_HENK,KC_RALT, KC_APP, KC_LEFT, KC_DOWN, KC_RGHT
  //|-----------------------------------------------------|   |--------------------------------------------------------------------------------'
  ),

  [_LOWER] = LAYOUT(
  //,-----------------------------------------------------|   |--------------------------------------------------------------------------------.
      _______,   KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,       KC_F6,   KC_F7,   KC_F8,   KC_F9,  KC_F10,  KC_F11,  KC_F12, _______, _______, KC_PSCR,
  //|--------+--------+--------+--------+--------+--------|   |--------+--------+--------+--------+--------+--------+--------+--------+--------|
      JP_DQUO, JP_EXLM, JP_QUES, JP_LBRC, JP_RBRC, JP_TILD,       KC_P6,   KC_P7,   KC_P8,   KC_P9, JP_ASTR, JP_SLSH, _______, _______, LALT(KC_PSCR),
  //|--------+--------+--------+--------+--------+--------|   |--------+--------+--------+--------+--------+--------+--------+--------+--------|
      JP_QUOT, JP_HASH,  JP_DQT, JP_LPRN, JP_RPRN,   JP_AT,     XXXXXXX,   KC_P4,   KC_P5,   KC_P6, JP_MINS,  JP_EQL, _______,          _______,
  //|--------+--------+--------+--------+--------+--------|   |--------+--------+--------+--------+--------+--------+--------+--------+--------|
      JP_CIRC, JP_PERC, JP_AMPR, JP_SCLN, JP_COLN, JP_PIPE,       KC_P0,   KC_P1,   KC_P2,   KC_P3, JP_PLUS, _______, _______, _______,
  //|--------+--------+--------+--------+--------+--------|   |--------+--------+--------+--------+--------+--------+--------+--------+--------|
      _______, _______, _______, _______,MO(_LOWER),_______,    _______, MO(_RAISE),JP_DOT, JP_DOT, _______,          _______, _______, _______ 
  //|-----------------------------------------------------|   |--------------------------------------------------------------------------------'
  ),

  [_RAISE] = LAYOUT(
  //,-----------------------------------------------------|   |--------------------------------------------------------------------------------.
      _______,   KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,       KC_F6,   KC_F7,   KC_F8,   KC_F9,  KC_F10,  KC_F11,  KC_F12, _______, _______, _______,
  //|--------+--------+--------+--------+--------+--------|   |--------+--------+--------+--------+--------+--------+--------+--------+--------|
       KC_TAB,    KC_1,    KC_2,    KC_3,    KC_4,    KC_5,     XXXXXXX, XXXXXXX,   KC_UP, XXXXXXX, XXXXXXX, XXXXXXX, _______, _______, _______,
  //|--------+--------+--------+--------+--------+--------|   |--------+--------+--------+--------+--------+--------+--------+--------+--------|
LCTL_T(KC_F11),XXXXXXX,   KC_F2,   KC_F3,   KC_F4,   KC_F5,     XXXXXXX, KC_LEFT, KC_DOWN,KC_RIGHT, XXXXXXX, XXXXXXX, _______,          _______,
  //|--------+--------+--------+--------+--------+--------|   |--------+--------+--------+--------+--------+--------+--------+--------+--------|
SFT_T(KC_F12),   KC_F6,   KC_F7,   KC_F8,   KC_F9,  KC_F10,     XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, _______, _______, _______,
  //|--------+--------+--------+--------+--------+--------|   |--------+--------+--------+--------+--------+--------+--------+--------+--------|
      _______, _______, _______, _______, _______, _______,     _______, _______, _______, _______, _______,          _______, _______, _______ 
  //|-----------------------------------------------------|   |--------------------------------------------------------------------------------'
  ),

  [_ADJUST] = LAYOUT( /* Base */
  //,-----------------------------------------------------|   |--------------------------------------------------------------------------------.
      XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,     XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, _______, _______,
  //|--------+--------+--------+--------+--------+--------|   |--------+--------+--------+--------+--------+--------+--------+--------+--------|
      XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,     RGB_RST, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, _______,
  //|--------+--------+--------+--------+--------+--------|   |--------+--------+--------+--------+--------+--------+--------+--------+--------|
      XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,     RGB_TOG, RGB_MOD, XXXXXXX,LCA(KC_DEL),LALT(KC_PSCR),KC_PSCR,_______,    _______,
  //|--------+--------+--------+--------+--------+--------|   |--------+--------+--------+--------+--------+--------+--------+--------+--------|
      XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,     RGB_VAD, RGB_VAI, RGB_HUD, RGB_HUI, RGB_SAD, RGB_SAI, _______, _______,
  //|--------+--------+--------+--------+--------+--------|   |--------+--------+--------+--------+--------+--------+--------+--------+--------|
      XXXXXXX, XXXXXXX, XXXXXXX, _______, _______,   RESET,       RESET, _______, _______, _______, _______,          _______, _______, _______ 
  //|-----------------------------------------------------|   |--------------------------------------------------------------------------------'
  )
};

//A description for expressing the layer position in LED mode.
layer_state_t layer_state_set_user(layer_state_t state) {
  state = update_tri_layer_state(state, _RAISE, _LOWER, _ADJUST);
#ifdef RGBLIGHT_ENABLE
    switch (get_highest_layer(state)) {
    case _LOWER:
      rgblight_sethsv_at(HSV_BLUE, 0);
      break;
    case _RAISE:
      rgblight_sethsv_at(HSV_RED, 0);
      break;
    case _ADJUST:
      rgblight_sethsv_at(HSV_PURPLE, 0);
      break;
    default: //  for any other layers, or the default layer
      rgblight_sethsv_at( 0, 0, 0, 0);
      break;
    }
    rgblight_set_effect_range( 1, 11);
#endif
return state;
}

uint8_t RGB_current_mode;
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
  bool result = false;
  switch (keycode) {
    #ifdef RGBLIGHT_ENABLE
      case RGB_MOD:
          if (record->event.pressed) {
            rgblight_mode(RGB_current_mode);
            rgblight_step();
            RGB_current_mode = rgblight_get_mode();
          }
        break;
      case RGB_RST:
          if (record->event.pressed) {
            eeconfig_update_rgblight_default();
            rgblight_enable();
            RGB_current_mode = rgblight_get_mode();
          }
        break;
    #endif
    default:
      result = true;
      break;
  }

  return result;
}