/* Copyright 2020 MudkipMao
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */

#pragma once

#include "config_common.h"

/* USB Device descriptor parameter */
#define VENDOR_ID       0xA13B // Hexidecimal A13B will be Jacky's vendor ID
#define PRODUCT_ID      0x0008 // 8 for S7++
#define DEVICE_VER      0x0002
#define MANUFACTURER    Jacky
#define PRODUCT         Jacky S7 Elephant Rev 2

/* Don't remove this without also removing LTO_ENABLE=yes in rules.mk */
#define NO_ACTION_MACRO
#define NO_ACTION_FUNCTION

/* key matrix size */
#define MATRIX_ROWS 5
#define MATRIX_COLS 16

/*
 * Keyboard Matrix Assignments
 *
 * Change this to how you wired your keyboard
 * COLS: AVR pins used for columns, left to right
 * ROWS: AVR pins used for rows, top to bottom
 * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
 *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
 *
 *
 *                        0   1   2   3   4   5   6   7   8   9   A   B   C   D   E   F   */
#define MATRIX_ROW_PINS { B0, B1, B2, B3, B7 }
#define MATRIX_COL_PINS { D0, D1, D2, D3, D5, D4, D6, D7, B4, F7, F6, F5, F4, F1, F0, E6 }

/* Setting the matrix value of top left key for bootmagic lite */
#define BOOTMAGIC_LITE_ROW      0
#define BOOTMAGIC_LITE_COLUMN   15

#define DIODE_DIRECTION ROW2COL

#define BACKLIGHT_PIN B6
// #define BACKLIGHT_BREATHING
#define BACKLIGHT_LEVELS 15

#define RGB_DI_PIN E2
#ifdef RGB_DI_PIN
#define RGBLIGHT_ANIMATIONS
#define RGBLED_NUM 2
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
#define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
#define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#endif // RGB_DI_PIN

/* Set 0 if debouncing isn't needed */
#define DEBOUNCE 5

/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE

/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE