The Nest
Explore
1
readme.md

Gray COD67

The Gray COD67 is a 60% keyboard with a modern and bold design. It features 20 RGB Underglow LED lights and a unique diffuser placement. The COD67 has the most stunning RGB light strip for a custom mechanical keyboard. It also features a center mounted USB C port.

There were only 75 units made worldwide.

Keyboard Maintainer: MechMerlin
Hardware Supported: Gray COD67
Hardware Availability: Zfrontier

Bootloader mode

To put in bootloader mode, hold the Esc key while plugging in the USB cable.

Making firmware

Make example for this keyboard (after setting up your build environment):

make gray_studio/cod67:default

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Flashing in Windows

After putting your COD67 in bootloader mode, it will show up as a drive.

  • Rename the resulting .bin file to COD67.BIN.
  • Drag and drop your new COD67.BIN to the drive, overwriting the previous COD67.BIN stored on it.
  • Wait a few seconds for it to write. The caps lock LED flashes rapidly while writing.
  • Press the Esc key again to reset the board. You are now ready to type!

Flashing in macOS

After putting your COD67 in bootloader mode, it will show up as a drive.

  • Rename the resulting .bin file to COD67.BIN.
  • Drag the existing COD67.BIN file from the drive to the Trash in Finder.
  • Empty the Trash in Finder. It's important you do that due to how macOS handles hidden .Trashes on removable drives. It needs to be empty to free up flash space.
  • Drag and drop your new COD67.BIN to the drive.
  • Wait a few seconds for it to write. The caps lock LED flashes rapidly while writing.
  • Press the Esc key or eject the drive in Finder to reset the board. You are now ready to type!