/* Copyright 2019 Takuya Urakawa (dm9records.com)
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include QMK_KEYBOARD_H
enum plaid_layers {
_QWERTY,
_LOWER,
_RAISE,
_ADJUST
};
enum plaid_keycodes {
QWERTY = SAFE_RANGE,
LED_1,
LED_2,
LED_3,
LED_4,
LED_5,
LED_6,
LED_7,
LED_8,
LED_9,
LED_0
};
#define LOWER MO(_LOWER)
#define RAISE MO(_RAISE)
// array of keys considered modifiers for led purposes
const uint16_t modifiers[] = {
KC_LCTL,
KC_RCTL,
KC_LALT,
KC_RALT,
KC_LSFT,
KC_RSFT,
KC_LGUI,
KC_RGUI,
LOWER,
RAISE
};
//Setup consts for LED modes
#define LEDMODE_ON 1 //always on
#define LEDMODE_OFF 0 //always off
#define LEDMODE_MODS 2 //On with modifiers
#define LEDMODE_BLINKIN 3 //blinkinlights - % chance toggle on keypress
#define LEDMODE_KEY 4 //On with any keypress, off with key release
#define LEDMODE_ENTER 5 // On with enter key
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/* Qwerty
* ,-----------------------------------------------------------------------------------.
* | Tab | Q | W | E | R | T | Y | U | I | O | P | Bksp |
* |------+------+------+------+------+-------------+------+------+------+------+------|
* |Esc/hy| A | S | D | F | G | H | J | K | L | ; | " |
* |------+------+------+------+------+------|------+------+------+------+------+------|
* | Shift| Z | X | C | V | B | N | M | , | . | / |Enter |
* |------+------+------+------+------+------+------+------+------+------+------+------|
* | Ctrl | fn | Alt | GUI |Lower | Space |Raise | GUI | Alt |Shift | Ctrl |
* `-----------------------------------------------------------------------------------'
* (karabiner remaps Caps lock -> fn)
*/
[_QWERTY] = LAYOUT_plaid_grid(
KC_TAB , KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC,
HYPR_T(KC_ESC), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT,
KC_RSFT , KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT ,
KC_RCTL , KC_CAPS, KC_RALT, KC_RGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_RGUI, KC_RALT, KC_RSFT, KC_RCTL
),
/* Lower
* ,-----------------------------------------------------------------------------------.
* | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp |
* |------+------+------+------+------+-------------+------+------+------+------+------|
* | | F1 | F2 | F3 | F4 | F5 | F6 | - | = | [ | ] | \ |
* |------+------+------+------+------+------|------+------+------+------+------+------|
* | | F7 | F8 | F9 | F10 | F11 | F12 | | | | | |
* |------+------+------+------+------+------+------+------+------+------+------+------|
* | | | | | | | | | Prev | Vol- | Play |
* `-----------------------------------------------------------------------------------'
* volume up key repeats randomly on mac, have to use mac specific volume
*/
[_LOWER] = LAYOUT_plaid_grid(
KC_GRV , KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0 , KC_BSPC,
_______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC , KC_BSLS,
_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, _______, _______ , _______,
_______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MPRV, KC__VOLDOWN, KC_MPLY
),
/* Raise
* ,-----------------------------------------------------------------------------------.
* | ~ | | | End | | | |Pg Up | | | | Del |
* |------+------+------+------+------+-------------+------+------+------+------+------|
* | | Home | |Pg Dn | | | Left | Down | Up |Right | | |
* |------+------+------+------+------+------|------+------+------+------+------+------|
* | | | | Copy |Paste | | | | | | | |
* |------+------+------+------+------+------+------+------+------+------+------+------|
* | | | | | | | | | Next | Vol+ | Mute |
* `-----------------------------------------------------------------------------------'
*/
[_RAISE] = LAYOUT_plaid_grid(
KC_TILD, _______, _______, KC_END, _______, _______, _______, KC_PGUP, _______, _______, _______ , KC_DEL ,
_______, KC_HOME, _______, KC_PGDN, _______, _______, KC_LEFT, KC_DOWN, KC_UP , KC_RGHT, _______ , _______,
_______, _______, _______, KC_COPY, KC_PSTE, KC_PGDN, _______, _______, _______, _______, _______ , _______,
_______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC__VOLUP, KC_MUTE
),
/* Adjust (Lower + Raise)
* ,-----------------------------------------------------------------------------------.
* |Reset | Red |Green | Rmod | Gmod |Rblink|Gblink| Rkey | Gkey | Rcar | Gcar | |
* |------+------+------+------+------+-------------+------+------+------+------+------|
* | |Power |Sleep |Wake |Eject | | | | | | | |
* |------+------+------+------+------+------|------+------+------+------+------+------|
* | | | | | | | | | | | | |
* |------+------+------+------+------+------+------+------+------+------+------+------|
* | | | | | | | | | | | |
* `-----------------------------------------------------------------------------------'
*/
[_ADJUST] = LAYOUT_plaid_grid(
RESET , LED_1 , LED_2 , LED_3 , LED_4 , LED_5 ,LED_6 , LED_7 , LED_8 , LED_9 , LED_0 , _______ ,
_______, KC_PWR , KC_SLEP, KC_WAKE, KC_EJCT, _______, _______, _______, _______, _______, _______, _______ ,
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ,
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
)
};
//Setup config struct for LED
typedef union {
uint32_t raw;
struct {
uint8_t red_mode :8;
uint8_t green_mode :8;
};
} led_config_t;
led_config_t led_config;
//Set leds to saved state during powerup
void keyboard_post_init_user(void) {
// set LED pin modes
setPinOutput(LED_RED);
setPinOutput(LED_GREEN);
// Call the post init code.
led_config.raw = eeconfig_read_user();
if(led_config.red_mode == LEDMODE_ON) {
writePinHigh(LED_RED);
}
if(led_config.green_mode == LEDMODE_ON) {
writePinHigh(LED_GREEN);
}
}
void eeconfig_init_user(void) { // EEPROM is getting reset!
led_config.raw = 0;
led_config.red_mode = LEDMODE_ON;
led_config.green_mode = LEDMODE_MODS;
eeconfig_update_user(led_config.raw);
}
layer_state_t layer_state_set_user(layer_state_t state) {
return update_tri_layer_state(state, _LOWER, _RAISE, _ADJUST);
}
void led_keypress_update(uint8_t led, uint8_t led_mode, uint16_t keycode, keyrecord_t *record) {
switch (led_mode) {
case LEDMODE_MODS:
for (int i=0;i<sizeof(modifiers) / sizeof(modifiers[0]);i++) {
if(keycode==modifiers[i]) {
if (record->event.pressed) {
writePinHigh(led);
}
else {
writePinLow(led);
}
}
}
break;
case LEDMODE_BLINKIN:
if (record->event.pressed) {
/* Markov Chain
*
* 1 - x 1 - y
* /---\ /---\
* v | v |
* /------\ x /------\
* | |------>| |
* | on | y | off |
* | |<------| |
* \------/ \------/
*/
/* Non-homogeneous Markov Chain
*
* /-----\ 1 - x0 /-----\ 1 - x1 /-----\
* |on 0|------->|on 1|------->|on 2|----> ...
* \-----/\ /\-----/\ /\-----/\
* \ / \ / .
* x0\ / x1\ / .
* \/ \/ .
* /\ /\
* y0/ \ y1/ \ .
* / \ / \ .
* / \ / \ .
* /-----\ 1 - y0 /-----\ 1 - y1 /-----\/
* |off 0|------->|off 1|------->|off 2|----> ...
* \-----/ \-----/ \-----/
*
*
* if x = 1/4 and y 1/4, behavior is equivalent to the original code
* and converges to a steady state at the rate of 1/2^k
* where k is the number of key presses
* (the distance from a given vector to the steady state, [1/2, 1/2],
* is cut in half every key press)
*
* if x = y, then it is guaranteed that the steady state is still
* [1/2, 1/2], but the rate at which it converges is variable
*
* if x != y, then there is no well-defined steady state
*/
double x = (1.0*rand())/RAND_MAX;
double y = x;
double p = (readPin(led)) ? x : y;
if (rand() < p*RAND_MAX) {
togglePin(led);
}
/* following code is restriced to x + y <= 1
* if(rand() % 2 == 1) { */
/* if(rand() % 2 == 0) { */
/* writePinLow(led); */
/* } */
/* else { */
/* writePinHigh(led); */
/* } */
/* } */
}
break;
case LEDMODE_KEY:
if (record->event.pressed) {
writePinHigh(led);
return;
}
else {
writePinLow(led);
return;
}
break;
case LEDMODE_ENTER:
if (keycode==KC_ENT) {
writePinHigh(led);
}
else {
writePinLow(led);
}
break;
}
}
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
/* If the either led mode is keypressed based, call the led updater
then let it fall through the keypress handlers. Just to keep
the logic out of this procedure */
if (led_config.red_mode >= LEDMODE_MODS && led_config.red_mode <= LEDMODE_ENTER) {
led_keypress_update(LED_RED, led_config.red_mode, keycode, record);
}
if (led_config.green_mode >= LEDMODE_MODS && led_config.green_mode <= LEDMODE_ENTER) {
led_keypress_update(LED_GREEN, led_config.green_mode, keycode, record);
}
switch (keycode) {
case QWERTY:
if (record->event.pressed) {
print("mode just switched to qwerty and this is a huge string\n");
set_single_persistent_default_layer(_QWERTY);
}
return false;
break;
case LED_1:
if (record->event.pressed) {
if (led_config.red_mode==LEDMODE_ON) {
led_config.red_mode=LEDMODE_OFF;
writePinLow(LED_RED);
}
else {
led_config.red_mode=LEDMODE_ON;
writePinHigh(LED_RED);
}
}
break;
case LED_2:
if (record->event.pressed) {
if (led_config.green_mode==LEDMODE_ON) {
led_config.green_mode=LEDMODE_OFF;
writePinLow(LED_GREEN);
}
else {
led_config.green_mode=LEDMODE_ON;
writePinHigh(LED_GREEN);
}
}
break;
case LED_3:
led_config.red_mode=LEDMODE_MODS;
break;
case LED_4:
led_config.green_mode=LEDMODE_MODS;
break;
case LED_5:
led_config.red_mode=LEDMODE_BLINKIN;
break;
case LED_6:
led_config.green_mode=LEDMODE_BLINKIN;
break;
case LED_7:
led_config.red_mode=LEDMODE_KEY;
break;
case LED_8:
led_config.green_mode=LEDMODE_KEY;
break;
case LED_9:
led_config.red_mode=LEDMODE_ENTER;
break;
case LED_0:
led_config.green_mode=LEDMODE_ENTER;
break;
}
if (keycode >= LED_1 && keycode <= LED_0) {
eeconfig_update_user(led_config.raw);
}
return true;
}