traveler keyboard firmware

Traveller Specific Info

The traveller is a varient on the atreus keyboard. Like the Atreus, it is designed to be a good compromise between size and ergonomics.

key differences are

• an additional column for each pinky
• an RGB LED in the center to show the current layer
• more finger stagger, splay angle and contoured keycaps (F2 profile for space key).

You can make your own traveller keyboard by using the openscad tools from the atreus repository, and adding a hole for the LED to shine through.

Quantum MK Firmware

For the full Quantum feature list, see the parent README.md.

Building

Download or clone the whole firmware and navigate to the keyboard/traveler folder. Once your dev env is setup, you'll be able to type make to generate your .hex - you can then use the Teensy Loader to program your .hex file.

Depending on which keymap you would like to use, you will have to compile slightly differently.

Default

To build with the default keymap, simply run make.

Other Keymaps

Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named <name>.c and see keymap document (you can find in top README.md) and existent keymap files.

To build the firmware binary hex file with a keymap just do make with KEYMAP option like:

$ make KEYMAP=[default|jack|<name>]

Keymaps follow the format <name>.c and are stored in the keymaps folder.