# Magicforce "61" Handwired

Basically I cut 7 keys off the magicforce68 and handwired everything to a teensy++ 2.0 to make it a ~60% board.

Keyboard Maintainer: [The QMK Community](https://github.com/qmk)  
Hardware Supported: magicforce61, teensy++ 2.0  

Make example for this keyboard (after setting up your build environment):

    make handwired/magicforce61:default

Flash the firmware using the teensy loader or avrdude.

See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

## Wiring Layout / Pinout

|        |  B5  |  B4  |  B3  |  B2  |  B1  |  B0  |  E7  |  E6  |  F0  |  F1  |  F2  |  F3  |  F4  |  F5  |
| -----: | :--: | :--: | :--: | :--: | :--: | :--: | :--: | :--: | :--: | :--: | :--: | :--: | :--: | :--: |
| **D0** | Esc  | 1!   | 2@   | 3#   | 4$   | 5%   | 6^   | 7&   | 8*   | 9(   | 0)   | -_   | =+   | Bspc |
| **D1** | Tab  | Q    | W    | E    | R    | T    | Y    | U    | I    | O    | P    | [{   | ]}   | \\\| |
| **D2** | Caps | A    | S    | D    | F    | G    | H    | J    | K    | L    | ;:   | '"   |      | Ent  |
| **D3** | LSft | Z    | X    | C    | V    | B    | N    | M    | ,    | .    | /    |      |      | RSft |
| **D4** | LCtl | LGUI | LAlt |      |      | Spc  |      |      |      | RAlt | RGUI |      | App  | RCtl |

The following pins are used:

```
#define MATRIX_ROW_PINS { D0, D1, D2, D3, D4 }
#define MATRIX_COL_PINS { B5, B4, B3, B2, B1, B0, E7, E6, F0, F1, F2, F3, F4, F5 }
```