#pragma once

#define PRODUCT_ID      0xDEF2
#define DEVICE_VER      0x0001

#ifdef RGBLIGHT_ENABLE
#define RGB_DI_PIN E2
#define RGBLED_NUM 13
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
#define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
#define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
/*== all animations enable ==*/
#define RGBLIGHT_ANIMATIONS
// /*== or choose animations ==*/
//     #define RGBLIGHT_EFFECT_BREATHING
//     #define RGBLIGHT_EFFECT_RAINBOW_MOOD
//     #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
//     #define RGBLIGHT_EFFECT_SNAKE
//     #define RGBLIGHT_EFFECT_KNIGHT
//     #define RGBLIGHT_EFFECT_CHRISTMAS
//     #define RGBLIGHT_EFFECT_STATIC_GRADIENT
//     #define RGBLIGHT_EFFECT_RGB_TEST
//     #define RGBLIGHT_EFFECT_ALTERNATING
#endif
 
//rgb matrix setting// This is a 7-bit address, that gets left-shifted and bit 0
// set to 0 for write, 1 for read (as per I2C protocol)
// The address will vary depending on your wiring:
// 0b1110100 AD <-> GND
// 0b1110111 AD <-> VCC
// 0b1110101 AD <-> SCL
// 0b1110110 AD <-> SDA
#define DRIVER_ADDR_1 0b1110110
#define DRIVER_ADDR_2 0b1110100
#define DRIVER_COUNT 1
#define DRIVER_1_LED_TOTAL 25
#define DRIVER_2_LED_TOTAL 0
#define DRIVER_LED_TOTAL 25
#define RGB_MATRIX_KEYPRESSES // reacts to keypresses
#define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (instead of keypresses)
#define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
#define RGB_DISABLE_WHEN_USB_SUSPENDED false // turn off effects when suspended
#define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness)
#define RGB_MATRIX_MAXIMUM_BRIGHTNESS 255 // limits maximum brightness of LEDs to 200 out of 255. If not defined maximum brightness is set to 255
#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_PINWHEEL // Sets the default mode, if none has been set