/* Copyright 2019 hineybush
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */

#include "physix.h"

// Optional override functions below.
// You can leave any or all of these undefined.
// These are only required if you want to perform custom actions.


void matrix_init_kb(void) {
    // put your keyboard start-up code here
    // runs once when the firmware starts up
    setPinOutput(D3);
    setPinOutput(D5);
    matrix_init_user();
}

bool led_update_kb(led_t led_state) {
    // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
    bool res = led_update_user(led_state);
    if(res) {
        // writePin sets the pin high for 1 and low for 0.
        // In this example the pins are inverted, setting
        // it low/0 turns it on, and high/1 turns the LED off.
        // This behavior depends on whether the LED is between the pin
        // and VCC or the pin and GND.
        writePin(D3, led_state.caps_lock);
        writePin(D5, led_state.scroll_lock);
    }
    return res;
    return led_update_user(led_state);
}