<?xml version='1.0' encoding='windows-1252'?>
<!--
Copyright (C) 2017 Christopher R. Field.
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
-->
<!--
The "cargo wix" subcommand provides a variety of predefined variables available
for customization of this template. The values for each variable are set at
installer creation time. The following variables are available:
TargetTriple = The rustc target triple name.
TargetEnv = The rustc target environment. This is typically either
"msvc" or "gnu" depending on the toolchain downloaded and
installed.
TargetVendor = The rustc target vendor. This is typically "pc", but Rust
does support other vendors, like "uwp".
CargoTargetBinDir = The complete path to the binary (exe). The default would
be "target\release\<BINARY_NAME>.exe" where
"<BINARY_NAME>" is replaced with the name of each binary
target defined in the package's manifest (Cargo.toml). If
a different rustc target triple is used than the host,
i.e. cross-compiling, then the default path would be
"target\<CARGO_TARGET>\<CARGO_PROFILE>\<BINARY_NAME>.exe",
where "<CARGO_TARGET>" is replaced with the "CargoTarget"
variable value and "<CARGO_PROFILE>" is replaced with the
value from the `CargoProfile` variable.
CargoTargetDir = The path to the directory for the build artifacts, i.e.
"target".
CargoProfile = Either "debug" or `release` depending on the build
profile. The default is "release".
Version = The version for the installer. The default is the
"Major.Minor.Fix" semantic versioning number of the Rust
package.
-->
<!--
Please do not remove these pre-processor If-Else blocks. These are used with
the `cargo wix` subcommand to automatically determine the installation
destination for 32-bit versus 64-bit installers. Removal of these lines will
cause installation errors.
-->
<?if $(sys.BUILDARCH) = x64 or $(sys.BUILDARCH) = arm64 ?>
<?define PlatformProgramFilesFolder = "ProgramFiles64Folder" ?>
<?else ?>
<?define PlatformProgramFilesFolder = "ProgramFilesFolder" ?>
<?endif ?>
<Wix xmlns='http://schemas.microsoft.com/wix/2006/wi'>
<Product
Id='*'
Name='papa'
UpgradeCode='1475BD9C-1F72-42ED-ADF8-1019033241B4'
Manufacturer='AnActualEmerald'
Language='1033'
Codepage='1252'
Version='$(var.Version)'>
<Package Id='*'
Keywords='Installer'
Description='A cli mod manager for the Northstar launcher'
Manufacturer='AnActualEmerald'
InstallerVersion='450'
Languages='1033'
Compressed='yes'
InstallScope='perMachine'
SummaryCodepage='1252'
/>
<MajorUpgrade
Schedule='afterInstallInitialize'
DowngradeErrorMessage='A newer version of [ProductName] is already installed. Setup will now exit.'/>
<Media Id='1' Cabinet='media1.cab' EmbedCab='yes' DiskPrompt='CD-ROM #1'/>
<Property Id='DiskPrompt' Value='papa Installation'/>
<Directory Id='TARGETDIR' Name='SourceDir'>
<Directory Id='$(var.PlatformProgramFilesFolder)' Name='PFiles'>
<Directory Id='APPLICATIONFOLDER' Name='papa'>
<!--
Disabling the license sidecar file in the installer is a two step process:
1. Comment out or remove the `Component` tag along with its contents.
2. Comment out or remove the `ComponentRef` tag with the "License" Id
attribute value further down in this file.
-->
<Component Id='License' Guid='*'>
<File Id='LicenseFile'
Name='License.rtf'
DiskId='1'
Source='wix\License.rtf'
KeyPath='yes'/>
</Component>
<Directory Id='Bin' Name='bin'>
<Component Id='Path' Guid='141A476B-5BBE-426B-A686-D7A7B8D93761' KeyPath='yes'>
<Environment
Id='PATH'
Name='PATH'
Value='[Bin]'
Permanent='no'
Part='last'
Action='set'
System='yes'/>
</Component>
<Component Id='binary0' Guid='*'>
<File
Id='exe0'
Name='papa.exe'
DiskId='1'
Source='$(var.CargoTargetBinDir)\papa.exe'
KeyPath='yes'/>
</Component>
</Directory>
</Directory>
</Directory>
</Directory>
<Feature
Id='Binaries'
Title='Application'
Description='Installs all binaries and the license.'
Level='1'
ConfigurableDirectory='APPLICATIONFOLDER'
AllowAdvertise='no'
Display='expand'
Absent='disallow'>
<!--
Comment out or remove the following `ComponentRef` tag to remove
the license sidecar file from the installer.
-->
<ComponentRef Id='License'/>
<ComponentRef Id='binary0'/>
<Feature
Id='Environment'
Title='PATH Environment Variable'
Description='Add the install location of the [ProductName] executable to the PATH system environment variable. This allows the [ProductName] executable to be called from any location.'
Level='1'
Absent='allow'>
<ComponentRef Id='Path'/>
</Feature>
</Feature>
<SetProperty Id='ARPINSTALLLOCATION' Value='[APPLICATIONFOLDER]' After='CostFinalize'/>
<!--
Disabling the custom product icon for the application in the
Add/Remove Programs control panel requires commenting out or
removing the following `Icon` and `Property` tags.
-->
<Icon Id='ProductICO' SourceFile='./ScorchIcon.ico'/>
<Property Id='ARPPRODUCTICON' Value='ProductICO' />
<Property Id='ARPHELPLINK' Value='https://github.com/AnActualEmerald/papa'/>
<UI>
<UIRef Id='WixUI_FeatureTree'/>
<!--
Disabling the EULA dialog in the installer is a two step process:
1. Uncomment the following two `Publish` tags
2. Comment out or remove the `<WiXVariable Id='WixUILicenseRtf'...` tag further down
-->
<!--<Publish Dialog='WelcomeDlg' Control='Next' Event='NewDialog' Value='CustomizeDlg' Order='99'>1</Publish>-->
<!--<Publish Dialog='CustomizeDlg' Control='Back' Event='NewDialog' Value='WelcomeDlg' Order='99'>1</Publish>-->
</UI>
<!--
Disabling the EULA dialog in the installer requires commenting out
or removing the following `WixVariable` tag
-->
<WixVariable Id='WixUILicenseRtf' Value='wix\License.rtf'/>
<!--
Uncomment the next `WixVaraible` tag to customize the installer's
Graphical User Interface (GUI) and add a custom banner image across
the top of each screen. See the WiX Toolset documentation for details
about customization.
The banner BMP dimensions are 493 x 58 pixels.
-->
<!--<WixVariable Id='WixUIBannerBmp' Value='wix\Banner.bmp'/>-->
<!--
Uncomment the next `WixVariable` tag to customize the installer's
Graphical User Interface (GUI) and add a custom image to the first
dialog, or screen. See the WiX Toolset documentation for details about
customization.
The dialog BMP dimensions are 493 x 312 pixels.
-->
<!--<WixVariable Id='WixUIDialogBmp' Value='wix\Dialog.bmp'/>-->
</Product>
</Wix>